OIL-OFF

Category:

This powerful alkaline liquid bilge cleaner has been developed for use in cleaning of engine room technical spaces, fuel tank degreasing, oil tank degreasing, pressure washing and manual cleaning. Its effective removal of grease, exhaust carbon, encrusted soil and heavy oil in all these applications. This liquid is composed of strong ALKALIES and alkaline builders, water softeners, emulsifiers, and synthetic wetting agents.
 
 
 
SPECIAL INSTRUCTIONS
 
• THIS PRODUCT CAN DAMAGE the following metals - aluminum, copper, brass, tin, zinc, and galvanized metal. If cleaner accidentally runs or is splashed onto these surfaces, RINSE OFF IMMEDIATELY
 
• Test surface before using
 
 
 
DIRECTION FOR USE
 
Recommended for removing heavy oils, caked grease, crusted dirt, hard clay, antirust coatings, sludge, and other extreme conditions. Avoid overspray onto finish. Some paints are alkali sensitive and may be harmed. Do not use on aluminum trim or grills. At some dilutions aluminum will be etched and lose its shine.
 
 
 
CONCRETE CLEANING:
 
To remove heavy oil accumulations from floors of service stations, garages, bilges, etc. Use at 1/3-1/5 - ratio water for heavy-duty purpose (2-3 l for 10 liter bucket of water). Diluted with 1/10-1/20 ratio water for general cleaning (0,5-1 l for 10 liter bucket of water). Mop or flood area to be cleaned with solution. Let stand for 10 minutes, and then agitate with stiff broom or brush. Hose off and rinse.
 
 
 
COMPOSITION FLOOR CLEANING:
 
A use dilution of 1/10-1/20 ratio water for general cleaning (0,5-1 l for 10 liter bucket of water). Usual floor cleaning procedures should be followed. Floors can be cleaned manually at same dilution. Do not allow solution to remain on the floor for prolonged periods of time.
 
Recommend Uses
Pressure Washing / Steam Cleaning 
Engine Degreasing 
Hot Tank/Soak Tank Cleaning 
Degreasing Floors, Parts, etc.
Benefits
Versatile
Economical/Fast Acting 
Non-flammable / Biodegradable / Solvent Free 
Effective in dissolving grease and oil 
Contains corrosion inhibitors 
Works in hot/cold water
 
Direction For Uses
SPECIAL INSTRUCTIONS
 
THIS PRODUCT CAN DAMAGE the following metals - aluminum, copper, brass, tin, zinc, and galvanized metal. If cleaner accidentally runs or is splashed onto these surfaces, RINSE OFF IMMEDIATELY 

 

Test surface before using